New Product

Published on December 31st, 2016 | by Joe

0

Factory UTV CAN-AM Maverick X3 UHMW Armor

factory_utv_maverick_x3_armor_01

We’ve extended the skid coverage to mitigate damage to the X3 Clutch Cover. This cover is exposed and very vulnerable to damage on stock X3’s. This shot also shows our X-Brace which is sandwiched between the Skid Plate and X3 frame during skid install. A must have option for hhard charging off roaders.

factory_utv_maverick_x3_armor_00

Story by: Factory UTV

We are happy to introduce our Can-Am Maverick X3 UHMW Skid Plate. Factory UTV’s UHMW Skid Plates are the gold standard for UTV protection systems. OEM skid plates simply do not satisfactorily protect the underside of your UTV under normal off road operation. The Can Am X3 OEM protection falls seriously short in a couple areas. Can Am uses HMW which has 1/10th the impact strength compared to the UHMW used for Factory UTV’s Armor. This is an important distinction on a machine as big and fast as the X3. The X3’s Clutch Cover is extremely vulnerable to damage from below with the OEM protection. Our Armor addresses the clutch cover vulnerability with coverage that extends out and around the cover to protect it from below. We’ve also added an X-Brace option under the engine/trans area of the X3. The X-Brace consists of a 1/8″ 6061 High Strength Aluminum sheet that gets sandwiched between the UHMW skid and X3 Frame during installation. If your going to play hard in your X3, you’ll need the added X-Brace protection. The X3 engine/trans is precariously close to the skid plate on an X3. We’ve also added a front differential skid plate covering an area left bar by the OEM. This diff plate is molded to conform with the X3 in that area. These are the same X3 UHMW Armor products you’ll see on the Can Am X3’s of top Can Am factory racers like Kyle Chaney, Marc Burnett and Monster Matt Burroughs to name just a few. They depend on Factory UTV UHMW Armor to get them to the finish line under the most demanding of race conditions. Join the #futvarmy and protect your X3 with the best Armor in the world, Factory UTV UHMW Armor!

factory_utv_maverick_x3_armor_03

Our UHMW A-Arm Guards offer excellent protection for you X3’s Arms and CV Boots. We’ll have guards avaiable for the rest of the X3 line soon, stay tuned!

We are happy to introduce our Can-Am Maverick X3 XRS UHMW A-Arm Guards. Factory UTV’s UHMW protection products are the gold standard for UTV protection systems. OEM protection simply does not satisfactorily protect the underside of your UTV under normal off road operation. The Can Am X3 OEM protection falls seriously short in several areas. We’ve addressed the lack of A-Arm protection with our popular UHMW A-Arm Guards. Constructed from ultra tough and slick UHMW, our guards protect your expensive A-arms from abuse. These guards also offer some protection for your CV-Boots which easily get punctured on the trail and ruin a good weekend ride. These are the same X3 UHMW Armor products you’ll see on the Can Am X3’s of top Can Am factory racers like Kyle Chaney, Marc Burnett and Monster Matt Burroughs to name just a few. They depend on Factory UTV UHMW Armor to get them to the finish line under the most demanding of race conditions. Join the #futvarmy and protect your X3 with the best Armor in the world, Factory UTV UHMW Armor!

factory_utv_maverick_x3_armor_02

UHMW (Ultra-High Molecular Weight) plastic. Significantly lighter than aluminum, FUTV skids and A-Arm guards offer full protection for the undercarriage of your UTV. UHMW is tough, wear resistant plastic that combines an incredibly low coefficient of friction with outstanding impact strength, and will outwear carbon steel 10 to 1. Unlike aluminum, UHMW also has memory, meaning after a big impact hits aluminum will bend ,gouge and break while UHMW maintains it’s original shape. These are the same protection products used to help racers win just about every major Pro UTV off road race including multiple King of Hammers, multiple UTV World Championships , multiple Mint 400’s, multiple 5 Silver State 300’s, multiple Baja 500’s and Baja 500’s, and multiple GNCC races and championships. These skid plates are very TOUGH! Protect your investment today!

About Factory UTV Products
Factory UTV, Inc. FUTV is leading UTV parts and accessories manufacturer well known as the industry pioneers who brought UHMW protection systems to the UTV Marketplace. A family owned and run enterprise, our Sacramento CA based manufacturing facility prides itself on delivering innovative new products to the ever growing UTV aftermarket and backing those products with unparalleled customer service. We are first and foremost enthusiast and bring decades of off roading experience to UTV parts design and fabrication. Check us out at www.factoryutv.net or give us a call 916-207-8335.

Tags: , , , , , , ,


About the Author



Leave a Reply

Back to Top ↑
  • Social

    Facebook2k
    Facebook
    YouTube4k
    YouTube
    Instagram109
  • Advert

  • Latest

  • Advert

  • FANS